Alinco DJ-596T Bedienerhandbuch PDF herunterladen (Seite 49)

9.Cloning and Packet Operation

Packet operation is one of the data communication methods, which enables data

transmission and reception with a personal computer through an optional TNC unit

available from third-parties.

9.2.1 Packet Operation Connections

Connect the packet communication TNC (Terminal Node Controller) terminals to the

SP (Ø3.5 mm plug) and MIC (Ø2.5 mm plug ) connectors on the top of the transceiver.

• Input level adjustment: The unit doesn't have microphone and speaker level

adjustment circuit. Adjust their level on the TNC side.

• Output level adjustment: Use the audio output ( key) of the unit to adjust the

output level from MIC/SP terminal.

(Low)

3.5ø PLUG

GND

MIC

PTT

GND

2.5ø PLUG

10kΩ

10µF

5.0V

GND

5.0V

GND

MIC

Packet Operation

9.2

Caution

• Refer to the TNC's instruction manual when connecting the TNC unit to other

devices (personal computer etc.). If the unit, TNC unit and connected personal

computer are set too close, noise between them may cause interference.

• Turn the battery save function off during packet operations.

• DJ-175 operates up to 1200bps only.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 59 60

Keine Kommentare

Alinco DJ-596T Bedienerhandbuch Seite 49