Alinco DJ-596T Bedienerhandbuch PDF herunterladen (Seite 28)

4.Basic Operation

1. Turn on the unit.

2. Press the key and rotate the dial to adjust the audio level as necessary.

3. Press the key and rotate the dial to adjust the squelch level.

4. Select the frequency that you wish to operate by using the dial or the keypad.

When a signal is received on the frequency that you selected, and S-meter

are displayed on the LCD, then the received signal can be heard. The green RX

indicator also lights at this time.

4.7.1 Monitor Function

In case the receiving signal is weak and the audio is intermittently cut off by the

squelch, press the MONI key. As long as this key is pressed, the squelch including

TSQ/DCS unmutes making the audio easier to hear.

• The squelch is unmuted while the MONI key is pressed, regardless of the squelch

level setting.

• This function unmutes the squelch even if the DCS and Tone Squelch functions are

set.

1. Select the frequency that you wish by using the dial or keypad.

2. Press the PTT key.

The red TX indicator turns on while transmitting.

3. While holding down the PTT key, speak into the unit at normal voice from the

distance of 5cm (2").

4. Release the PTT key to receive.

IMPORTANT NOTE:

• To transmit a tone-burst signal, press the MONI key while holding down the

PTT key.

• Speaking too loud, too close or too far from the unit may distort the audio.

• "OFF" appears on the display and a beep sounds when the PTT key is pressed

with the TX frequency set out of the TX range. You can not transmit in this state.

Transmitting

4.8

Receiving

4.7

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Keine Kommentare

Alinco DJ-596T Bedienerhandbuch Seite 28