Alinco DJ-596T Bedienerhandbuch PDF herunterladen (Seite 42)

8.Set Mode

8.3.1 Menu 1 Battery Save (BS) Function

This function prevents useless battery consumption by switching the power ON/OFF

at a fixed ratio if there is no key operation or receiving signal for a continuous period

of 5 seconds or more.

1. BS-1 is displayed on the LCD.

2. Rotate the dial to select BS-1, BS-2 or OFF.

BS-1 saves the more amount of battery but may cause slight delay on receiving. BS-2 allows

smoother communication but saves the less amount of battery. OFF cancels the BS function.

• The factory setting is BS-1.

• The Battery Save function is temporarily suspended when a key is operated or a

signal is received.

• Set this parameter OFF for packet operation.

• The display remain unchanged even the BS function is in the OFF cycle.

8.3.2 Menu 2 Timer/Busy Scan Setting

Select the scan-resume condition in this menu (page 30).

1. TIMER is displayed on the LCD.

2. Rotate the dial to select the scan-resume condition between TIMER and BUSY.

8.3.3 Menu 3 Beep Function

Select OFF to turn off all the beep sounds inclusive of alerting beeps.

1. BEP-ON is displayed on the LCD.

2. Rotate the dial to select the beep setting on and off.

8.3.4 Menu 4 Tone-Burst Frequency Setting

1. 1750 is displayed on the LCD.

2. Rotate the dial to select the tone-burst frequency.

1750 2100

1000

1450

(unit: Hz)

BEP-ON BEP-OF

TIMER BUSY

BS-1 BS-2 BS-OFF

Available Parameters

8.3

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Keine Kommentare

Alinco DJ-596T Bedienerhandbuch Seite 42