Alinco DJ-596T Bedienerhandbuch PDF herunterladen (Seite 23)

4.Basic Operation

The factory default of this unit is the VFO mode. The VFO mode allows you to

change the frequency and operating parameters by using the dial and key operations.

4.4.1 Setting the Frequency

To Select the VFO Mode

The key switches between the VFO and Memory mode each time the

key is pressed.

"" is displayed on the LCD when the unit is in the Memory mode.

Selecting the Operating Frequency

Rotate the dial clockwise to increase the frequency by one tuning step.

Rotate the dial counter-clockwise to decrease it by one tuning step.

To Quickly Change the Frequency

Press the FUNC key, and while is displayed on the screen, rotate the dial to

increase or decrease (depending on the direction of rotation) the frequency by 1MHz

order.

Entry from the Keypad

Use the numeric keys to set the frequency. It accepts valid numbers only.

ie: 145.210 MHz

1. Input the 100MHz digit by pressing

2. Input the 10MHz digit by pressing

3. Input the 1MHz digit by pressing

4. Input the 100kHz digit by pressing

5. Input the 10kHz digit by pressing

6. Input the 1kHz digit by pressing

Depending on the tuning step, entry may be required to the 1kHz digit.

The relationship between the tuning step and entry-completion digit is shown in the

following chart. The setting will be completed automatically when the last digit is

correctly entered and a high-tone beep sounds.

■

Setting the Frequency in the VFO Mode

4.4

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Keine Kommentare

Alinco DJ-596T Bedienerhandbuch Seite 23