Alinco EJ-41U Bedienerhandbuch PDF herunterladen (Seite 30)

7. Advanced Operations

•DCS scan

Same as previous, but for DCS code search.

1. Press TS/DCS key to enter DCS setting mode.

2. Press UP/DOWN key for more than 1 second

but less than 2 seconds to start. It searches the

104 DCS codes in order.

3. The 1 MHz order decimal point will flash.

4. The scan stops when the matching code is de-

tected.

5. The scan won’t resume until the operation is

repeated.

6. Press any key (other than UP/DOWN keys) to

exit.

KEY-LOCK FUNCTION

This will lock the keys to avoid unintentional changes.

1. Press FUNC key and press TS/DCS key while

F icon is on the display.

2. The [ ] icon appears.

3. With this function activated, only the follow-

ing commands can be accessed:

• PTT

• FUNC+TS/DCS to cancel this function

• Monitor function (to release squelch for weak

signal reception)

• Squelch setting

• UP/DOWN keys

TONE BURST

Press the DOWN key while PTT is pressed. The tone burst will be transmitted as long as both keys

are pressed together. Usually just a few seconds of burst is enough to activate the repeater.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 46 47

Keine Kommentare

Alinco EJ-41U Bedienerhandbuch Seite 30