Alinco DJ-S45 Bedienungsanleitung PDF herunterladen (Seite 36)

6.Advanced Operations

6-4 Tone Call (Tone Burst)

Use this function to call a partner by adding an audible tone to the

transmitting signal.

The tone signal is output while the MONI key is pressed down while

the PTT key is pressed and held. The call tone sound can be selected

in the Setting mode (page 24, ITEM No.05).

Use this function to access tone burst system repeaters by selecting

proper tone.

6-5 Channel Display Mode

This mode is to display the memory channel number only in memory

mode operation.

Prior to use this mode, please program the memory channel(s).

1. Turn off, then turn on with both and

keys pressed.

2. Repeat the same sequence to return to the

original display indication mode.

3. Please note that in this status the operating

parameters are only limited to those

programmed in memory and the access to

the Setting mode becomes disabled. Go

back to the original display indication

mode to change the parameters.

▼

▲

Caution

A tone call signal cannot be output with a tone ENC signal.

During call tone output, the ENC signal cannot be transmitted.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Keine Kommentare

Alinco DJ-S45 Bedienungsanleitung Seite 36