Alinco DJ-V57 Bedienungsanleitung PDF herunterladen (Seite 31)

4.Basic Operation

This mode is used to recall a most frequently used memory channel (stored in MC

channel) with a single key-touch.

1. Press the key.

" " is displayed on the LCD, and the channel

programmed in MC is recalled.

2. Press the key again or the key in the

Call mode to return to original operating mode

(VFO/memory).

How to Program Call-Channel Mode

1. Select the Memory mode by pressing the key.

2. Rotate the dial to select the MC channel.

3. Select the VFO mode by pressing the key.

4. Press the FUNC key to display and MC.

5. By pressing the key again while is on the display, a beep sounds and

programming is completed.

1. Turn on the unit.

2. Press the key and rotate the dial to adjust the audio level as necessary.

3. Press the key and rotate the dial to adjust the squelch level.

4. Select the frequency that you wish to operate by using the dial or the keypad.

When a signal is received on the frequency that you selected, and S-meter

are displayed on the LCD, then the received signal can be heard. The green RX

indicator also lights at this time.

Receiving

4.8

IMPORTANT NOTE:

• The dial and direct key-entry of frequency/memory channel are blocked in the

Call mode.

• It is possible to temporary change the offset and CTCSS/DCS related

parameters in the Call mode.

• The Scan function is deactivated in the Call mode.

• The CALL channel reprogramming is possible but it can't be deleted from the

memory channel mode.

■

Call-Channel Mode

4.7

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 71 72

Keine Kommentare

Alinco DJ-V57 Bedienungsanleitung Seite 31